Zigbang SHP-R80 - How to add/delete fingerprint access

Register (Add) Fingerprint / Delete Individual Fingerprint / Delete All Fingerprints 


You can register up to 100 fingerprints. Registered fingerprints can be deleted individually or collectively.


3 * > Register (Add) 1 * > (Fingerprint) >  Click lock button (complete) 

Can be registered continuously (Within 60 seconds)


3 * > Delete individual fingerprint 2 * > (Fingerprint) Click lock button (complete)

Can be deleted continuously (Within 60 seconds)


3 * > Delete all fingerprints 3 *


How to Register Fingerprint 


Place a finger on the fingerprint sensor to register. Change the angle of the finger 6 times and make contact with the sensor when registering a fingerprint.


※ Number of contacts made by fingerprint appears on the keypad with the ‘Ding’ sound when registering a fingerprint. Register the fingerprints in the same method according to voice guidance when adding fingerprints. Press the [Register] button on the interior unit when registration is complete.



References: 

  • It is recommended to register thumbs or index fingers when registering fingerprints.
  • Register the fingerprint for a finger you use often if you wish to improve the fingerprint recognition rate.
  • Recognition rate may be low if it is a fingerprint of a child or if the fingerprint is faint (or damaged). Fingerprints may not register or be recognised in such instance.
  • If the surface of the fingerprint is too rough (damaged or bubble present on the finger), the fingerprint may not be recognised. Recognition rate may suffer if the finger is too small or thin, or if the finger is bent, or if only the fingertip is used for authentication. You must cover the entire fingerprint sensor with your finger when registering your fingerprint.
  • If the fingerprint sensor or the finger is dirty or wet, try again after wiping
  • If the surrounding environment is dry, static may occur for the product. In such an instance, avoid using fingerprint recognition or make contact with another metallic object before fingerprint recognition to eliminate static and try again.
  • Be careful not to scratch the fingerprint sensor with coins, keys, necklaces, and other metallic objects.
  • Close the door after checking that the fingerprint has been added or deleted accurately.