Zigbang SHP-H60F - How to use Wi-Fi function

Wi-Fi Use


By default, the WiFi Use is set.

1. Enter Setting Mode
2. Select WiFi Use

Touch the [9] button.

Touch the [*] button.


Select the Setting mode. (Refer to the Setting mode)


[Activation/Deactication Wi-Fi Use]

3. Select Activation/Deactivation - Select the setting

Touch the [1] button 

  • Select the deactivation

Touch the [*] button.


Touch the [3] button.

Touch the [*] button.


Note: 

  • When WiFi Use is deactivated, a user cannot use various other services provided by the App. Note.
  • If you do not use the app, it is recommended to deactivate the use of WiFi.

[WPS mode]


When an AP is changed while a WiFi is used after its registration, this WPS mode allows convenient setting from the connection to the security setting without complex process. This mode can be used only when an AP supporting the WPS. For the information on how to use the WPS of an AP refer to the AP user manual.


3. Select WPS of Changed AP

Select the WPS of a changed AP

4. Select WPS

Touch the [5] button.

Touch the [*] button.

5. Connect to AP

The AP is being connected.


Note: 

  • WPS: WiFi Protected Setup.
  • If an AP does not support the WPS, take the WiFi registration procedure again to use the changed AP. 
  • For the information on the WiFi registration.