Door Lock - SHP-DS510
      Back to home
      1. Help Centre
      2. SAMSUNG - INTERNAL - Technical Support
      3. Door Lock - SHP-DS510

      →SHP-DS510 Programming

      How to change master pin code

      1. Unlock and open door
      2. Take battery cover off
      3. Press [REG] button once to start registration mode
      4. Enter current master pin code + *
      5. Press 1 + *
      6. Enter new master pin code (4-10 digits) + *
        • Voice guide will assist you

      How to register key tag or user pin code

      • Key tag registration 
        1. Unlock and open door
        2. Take battery cover off
        3. Press [REG] button to start registration
        4. Enter master pin code + *
        5. Enter 2 + *
        6. Enter 1 + *
        7. Enter user number (1-100) + *
        8. Hold key tag to the lit CARD symbol on the keypad
        9. Repeat from step 7 if registering other key tags OR press [REG] button to end registration
      • User pin code registration
        1. Unlock and open door
        2. Take battery cover off
        3. Press [REG] button to start registration
        4. Enter master pin code + *
        5. Enter 2 + *
        6. Enter 1 + *
        7. Enter user number (1-100) + *
        8. Enter new user pin code + *
        9. Repeat from step 7 if registering other pin codes OR press [REG] button to end registration

      How to delete key tag or user pin code

      1. Unlock and open door
      2. Take battery cover off
      3. Press [REG] button to start registration
      4. Enter master pin code + *
      5. Press 2 + *
      6. Press 3 + *
      7. Enter user number to delete (1-100) + *
      8. Repeat from step 7 if deleting other user numbers OR press [REG] button to end registration

      How to factory reset

      1. Unlock and open door
      2. Take battery cover off
      3. Press and hold [REG] button for 5 seconds or until “If you want to initialise it, please enter the initialisation number” prompt is heard
      4. Enter [Factory reset code]  + *
        • 4560852580 : Factory reset without door direction setting
        • 1470852369 : Factory reset including door direction setting
      5. Set door lock direction by using the magnetic sensor and magnet. If magnetic sensor and magnet has already been installed, door lock direction can be set by closing the door and allowing the magnetic sensor to sense the magnet

      Additional functions

      NOTE: DS510 is not set to automatic setting as default.